Micro-Mechanics: Small Tools, Critical To Advanced Packaging

Micro-Mechanics makes precision consumable tools and parts for semiconductor production. A record 1QFY27 saw revenue rise 45.0% YoY, net profit more than double and gross margin hit a 20-quarter high of 55.0%. Underpinned by its high-margin, replacement-driven consumables business and visible operating leverage, we initiate with a BUY rating and a SGD 3.38 target price (43.2% upside).

Tan Qiuyi Charmaine
Tan Qiuyi Charmaine13 Nov 2026 4 Views
Micro-Mechanics: Small Tools, Critical To Advanced Packaging

Initiation Coverage

Micro-Mechanics (Holdings) Limited (SGX: 5DD)

BUY: SGD 3.38 (+43.2%)

  • Precision consumables for chip assembly and test: Micro-Mechanics makes high-precision consumable tools for semiconductor assembly and test, which wear out with use and help improve yields, as well as precision metal parts for wafer fabrication equipment (WFE) and other high-tech industries. It serves more than 600 customers from five factories in Singapore, Malaysia, China, the Philippines and the USA.
  • Record 1QFY27 extends a year of accelerating growth: 1QFY27 revenue rose 45.0% YoY to a record SGD 24.2 million, net profit more than doubled (+102.8% YoY) to a record SGD 6.4 million. Gross margin hit a 20-quarter high of 55.0%, building on FY2026, when revenue grew 15.8% YoY to SGD 75.5 million and net profit rose 28.3% YoY to SGD 15.9 million.
  • High-margin consumables engine with utilisation-linked demand: Consumable Tools contributed 80.0% of FY2026 revenue and generated a segment operating margin of about 36.6%, which rose further to about 39.7% in 1QFY27. These tools wear out with use and are replaced in line with customers' factory utilisation, and management points to new product introductions and advanced packaging as additional drivers of higher-value demand.
  • Five-year plan to double revenue, backed by a stepped-up investment cycle: Management targets revenue of at least SGD 150 million by FY2031 (an implied 14.7% CAGR), with gross margin above 50% (FY2026: 51.6%; 1QFY27: 55.0%) and overheads below 20% of revenue (1QFY27: 20.7%), leaving room for margins to ease as depreciation rises. FY2027 capex is guided to rise to SGD 12.0 million from SGD 3.8 million, funded from a SGD 31.1 million net cash balance sheet with no bank borrowings.
  • Initiate with a BUY rating along with a SGD 3.38 target price, 43.2% upside: Applying a 15.2x fair P/E multiple to our FY2029E EPS forecast of 22.3 cents, we arrive at a target price of SGD 3.38, representing 43.2% upside from Micro-Mechanics' closing price of SGD 2.36 as of 11 November 2026.

The semiconductor industry is in the strongest upcycle in its history. According to the Semiconductor Industry Association (SIA), global semiconductor sales rose 144.3% YoY to USD 159.7 billion in August 2026, the 18th consecutive month of growth, and year-to-date sales have already surpassed USD 1 trillion for the first time. World Semiconductor Trade Statistics (WSTS) expects 2026 global sales to grow 108.1% YoY to almost USD 1.7 trillion, led by memory and logic demand for AI and computing.

Micro-Mechanics (SGX: 5DD) sits inside this value chain as a supplier of the small but process-critical tools that semiconductor assembly and test lines consume every day. Founded in 1983 and listed on the SGX Mainboard since 2003, the Group turned this demand into FY2026 revenue of SGD 75.5 million (+15.8% YoY) and net profit of SGD 15.9 million (+28.3% YoY), with growth accelerating into 4QFY26 (revenue +29.2% YoY, net profit +65.7% YoY). The momentum carried into 1QFY27, when revenue reached an all-time quarterly high of SGD 24.2 million (+45.0% YoY) and net profit a record SGD 6.4 million (+102.8% YoY).

As advanced packaging, assembly and test processes grow more complex, customers increasingly need suppliers that can meet tighter requirements on accuracy, repeatability, cleanliness and trace metals, in multiple locations at once. These requirements raise the bar for suppliers, and the Group is investing to stay competitive.

We initiate coverage on Micro-Mechanics with a BUY rating and a target price of SGD 3.38, representing 43.2% upside from its closing price of SGD 2.36 as of 11 November 2026. Our positive view rests on a high-margin consumables business with utilisation-linked demand, visible operating leverage and structural tailwinds from advanced packaging and supply chain localisation. While the step-up in capital expenditure and the cyclicality of the semiconductor industry warrant monitoring, we believe the Group's earnings power over FY2027 to FY2029, now more visible after the record 1QFY27, is not yet fully reflected in its current valuation.

Company Overview

Business model spans two operating segments

Micro-Mechanics manufactures from five factories in Singapore, Malaysia (Penang), China (Suzhou), the Philippines (Laguna) and the USA (California), supported by distributors and agents in Taiwan, Japan, Thailand, Indonesia and Europe. The Group reports two operating segments, Consumable Tools and Build-to-Print Precision Components, alongside a Corporate and Others segment.

Table 1: Micro-Mechanics' business segments

Segment

What it makes

Who it serves

Typical lead time

FY2026 revenue (SGD million)

Share of revenue

Consumable Tools

High-precision micro-machined tools and parts for die attach, wire bonding, and advanced packaging and custom tooling

Back-end equipment makers, integrated device manufacturers (IDMs) and outsourced semiconductor assembly and test (OSAT) companies

2 to 4 weeks

60.4

80.0%

Build-to-Print Precision Components (formerly WFE Parts)

High-precision metal parts for lithography, deposition, etch, CMP, ion implantation, thermal, clean and wafer handling equipment

Wafer front-end process equipment makers, plus other high-tech industries

2 to 4 months

15.1

20.0%

Source: Micro-Mechanics FY2026 results presentation.

The two segments have very different economics.

  • Consumable Tools generated FY2026 operating profit of SGD 22.1 million on SGD 60.4 million of revenue, a segment operating margin of about 36.6%.
  • Build-to-Print, made at the Group's California plant, generated operating profit of only SGD 0.7 million on SGD 15.1 million of revenue (about 4.3%), down from SGD 1.1 million in FY2025 as material delays and shortages pushed the segment to an operating loss of SGD 0.4 million in 1QFY26.

Consumables therefore accounted for virtually all of the Group's FY2026 earnings. This began to change in 1QFY27, when Build-to-Print generated operating profit of SGD 1.3 million on SGD 5.9 million of revenue (a margin of about 22.2%), compared with an operating loss of SGD 0.4 million a year earlier.

Figure 1: Revenue by segment, FY2025, FY2026 and 1QFY27 (SGD million)

Table 2: Revenue by geographical market, FY2026 vs FY2025

Market

FY2026 (SGD million)

FY2025 (SGD million)

YoY change

Share of FY2026 revenue

China

25.8

20.4

+26.6%

34.2%

USA

16.0

14.6

+10.0%

21.2%

Malaysia

14.0

12.1

+15.1%

18.5%

Singapore

6.0

5.7

+4.6%

7.9%

Philippines

4.1

3.2

+29.6%

5.5%

Taiwan

4.1

3.9

+4.5%

5.5%

Others

5.4

5.2

+4.0%

7.2%

Total

75.5

65.2

+15.8%

100.0%

Source: Micro-Mechanics FY2026 financial statements.

No single customer contributed more than 10% of Group revenue in FY2026 or 1QFY27, compared with one WFE customer that contributed SGD 6.3 million in FY2025 (9.7% of total revenue in FY25, 10.7% of total revenue in FY24), further reducing concentration risk.

FY2026 earnings highlights

For the financial year ended 30 June 2026 (FY2026), Micro-Mechanics reported Group revenue of SGD 75.5 million (+15.8% YoY), driven primarily by Consumable Tools, where sales rose 19.8% YoY to SGD 60.4 million. WFE (now Build-to-Print) sales grew 2.3% YoY to SGD 15.1 million.

Growth accelerated through the year: quarterly revenue growth stepped up from +2.9% YoY in 1QFY26 to +14.5%, +16.2% and +29.2% in the following three quarters. 4QFY26 revenue of SGD 21.6 million was also 16.4% higher quarter-on-quarter, with Consumable Tools sales up 20.7% QoQ on stronger customer demand.

Gross profit rose 20.8% YoY to SGD 38.9 million, and gross margin improved 2.2 percentage points to 51.6% for FY2026. 4QFY26 gross margin reached 52.0%, a 17-quarter high at the time, which management attributed to operating leverage, stronger customer engagement, new product development and enhanced manufacturing processes.

Operating expenses grew more slowly than revenue. On the company's measure, distribution, administrative and other operating expenses (net of other income, plus net finance expense) fell to 23.0% of revenue from 24.3% in FY2025, even as the Group paid higher sales incentives and bonuses and spent more on IT and cybersecurity.

We note that 4QFY26 administrative expenses benefited from a one-off reversal of prior years' bonus accruals of approximately SGD 0.4 million; excluding this, 4QFY26 administrative expenses would have risen 19.4% YoY instead of 1.1% YoY for the quarter.

The effective tax rate rose to about 26.2% from 24.2%, mainly reflecting a larger contribution from higher-tax foreign jurisdictions and a smaller benefit from previously unrecognised tax losses.

Net profit rose 28.3% YoY to SGD 15.9 million, with EPS of 11.44 cents (FY2025: 8.92 cents).

Figure 2: Group revenue and net profit, FY2022 to FY2026 (SGD million)

Table 3: Condensed Income Statement

(in SGD '000 unless otherwise stated)

FY2026

FY2025

Change (%)

4QFY26

4QFY25

Change (%)

Revenue

75,524

65,211

+15.8%

21,599

16,715

+29.2%

Gross profit

38,935

32,219

+20.8%

11,224

8,196

+36.9%

Gross profit margin (%)

51.6%

49.4%

+2.2pp

52.0%

49.0%

+3.0pp

EBITDA

27,620

22,733

+21.5%

8,384

5,840

+43.6%

EBITDA margin (%)

36.6%

34.9%

+1.7pp

38.8%

34.9%

+3.9pp

Profit before tax

21,551

16,353

+31.8%

6,895

4,176

+65.1%

Net profit

15,909

12,395

+28.3%

5,270

3,181

+65.7%

Basic EPS (SGD cents)

11.44

8.92

+28.3%

3.79

2.29

+65.5%

NAV per share (SGD cents)

41.38

35.40

+16.9%

Source: Micro-Mechanics FY2026 financial statements and media release. Data as of the financial year ended 30 June 2026.

1QFY27 earnings highlights: a record quarter

For the first quarter ended 30 September 2026 (1QFY27), Micro-Mechanics reported Group revenue of SGD 24.2 million, up 45.0% YoY and 12.2% QoQ, an all-time quarterly high. Consumable Tools sales rose 33.7% YoY (+5.7% QoQ) to SGD 18.4 million on stronger customer demand, while Build-to-Print sales almost doubled (+97.5% YoY, +39.0% QoQ) to SGD 5.9 million, supported by higher bookings and the recovery from material delays and shortages in 1QFY26.

Growth was broad-based across geographies. Sales in China, still the Group's largest market at 30.7% of revenue, rose 23.1% YoY to SGD 7.4 million. Sales in the USA grew 83.4% YoY to SGD 5.7 million (23.4% of revenue), in line with the Build-to-Print recovery, while Malaysia (+41.6%), Singapore (+64.0%), the Philippines (+46.8%) and Taiwan (+46.2%) all posted strong gains.

Gross profit rose 55.0% YoY to SGD 13.3 million and gross margin expanded 3.5 percentage points to a 20-quarter high of 55.0%, which management attributed to operating leverage, stronger customer engagement, new product development and enhanced manufacturing processes.

Overheads on the company's measure (distribution, administrative and other operating expenses net of other income, plus net finance expense) fell to 20.7% of revenue from 25.1% a year earlier, already close to management's FY2031 target of below 20%, even as the Group absorbed higher headcount, IT and cybersecurity spending and performance bonus contributions.

The effective tax rate fell to 22.9% from 28.4% a year earlier.

Net profit more than doubled (+102.8% YoY) to a record SGD 6.4 million, with net profit margin up 7.5 percentage points to 26.4% and EPS of 4.62 cents. On a QoQ basis, net profit rose 21.6% from SGD 5.3 million in 4QFY26.

Figure 3: Quarterly revenue and gross margin, 1QFY26 to 1QFY27

Table 4: Condensed Income Statement, 1QFY27

(in SGD '000 unless otherwise stated)

1QFY27

1QFY26

YoY change

4QFY26

QoQ change

Revenue

24,245

16,715

+45.0%

21,599

+12.2%

Consumable Tools

18,375

13,743

+33.7%

17,377

+5.7%

Build-to-Print

5,870

2,972

+97.5%

4,222

+39.0%

Gross profit

13,333

8,603

+55.0%

11,224

+18.8%

Gross profit margin (%)

55.0%

51.5%

+3.5pp

52.0%

+3.0pp

EBITDA

9,790

5,942

+64.8%

8,384

+16.8%

EBITDA margin (%)

40.4%

35.5%

+4.8pp

38.8%

+1.6pp

Profit before tax

8,315

4,412

+88.4%

6,895

+20.6%

Net profit

6,406

3,160

+102.8%

5,270

+21.6%

Net profit margin (%)

26.4%

18.9%

+7.5pp

24.4%

+2.0pp

Source: Micro-Mechanics 1QFY2027 financial statements and media release, iFAST calculations. Data as of the quarter ended 30 September 2026.


Balance sheet: net cash, zero bank borrowings

As of 30 September 2026, Micro-Mechanics held cash and bank balances of SGD 33.3 million (30 June 2026: SGD 30.1 million) and no bank borrowings, with lease liabilities of SGD 2.2 million. Shareholders' equity rose to SGD 63.3 million and NAV per share to 45.64 cents (30 June 2026: 41.38 cents). The Group reported FY2026 ROE of 27.7%, and trailing 12-month ROE of 30.2% as at 1QFY27. Looking ahead, management reiterated at its 1QFY27 results briefing on 27 October 2026 that it prefers to grow organically without debt and will continue to fund growth from its balance sheet.

Inventory rose to SGD 5.3 million as at 30 September 2026 (30 June 2026: SGD 4.9 million), as the Group continued to build stock to fulfil confirmed backlog orders amidst higher material costs and longer lead times, although inventory fell to 5.4% of annualised sales from 6.5% of FY2026 sales. Trade receivables grew to SGD 18.4 million in line with higher revenue, with only SGD 11,000 outstanding for 90 days or more and no bad debts written off.

Dividend policy: minimum 40% payout

Micro-Mechanics has a formal dividend policy to distribute not less than 40% of after-tax annual earnings. For FY2026, the Board declared an interim dividend of 3.0 cents and recommended a final dividend of 3.0 cents per share (one-tier tax-exempt), bringing the total to 6.0 cents, a payout ratio of 52.4%, above the policy minimum.

Total dividends have been held at 6.0 cents per share for FY2024 to FY2026, down from 9.0 cents in FY2023 and 12.0 cents in FY2021 and FY2022 (excluding special dividends of 2.0 cents in each of those years).

No dividend was declared for 1QFY27, in line with the Group's practice since its IPO of declaring dividends in the second and fourth quarters. At the results briefing, management did not commit to the size of the 2QFY27 interim dividend, pointing to expansion plans ahead and a cash buffer against market volatility. We address the implications for our dividend forecasts in the “Our forecasts” section.

Figure 4: Dividend per share, FY2005 to FY2026 (SGD cents)

Management and ownership

Micro-Mechanics is led by Executive Chairman and founder Christopher Reid Borch and Chief Executive Officer Kyle Borch, his eldest son. Kyle Borch joined as Executive Director and Deputy CEO on 1 January 2023, relocating to Singapore to lead the Group’s Five-Star Factory initiative, and was promoted to CEO on 1 July 2025. Although the Chairman and CEO roles are held by different people, both sit with the founding family, so the board’s independent checks matter more.

Independent directors hold three of the five board seats (60%), and Mr Kenny Kwan serves as Lead Independent Director. All three board committees (Audit and Risk, Nominating, and Remuneration) consist entirely of independent directors.  We view this as an adequate counterbalance to family control, although the independent majority reflects the Code of Corporate Governance 2018, which requires it when the Chairman is not independent. The Group ranked 32nd of 452 companies in the 2026 Singapore Governance and Transparency Index (SGTI).

The Group’s substantial shareholders are Sarcadia LLC, a family company set up by Mr Christopher Borch that holds 30.12% of issued shares, and members of the Borch family. Mr Christopher Borch, his wife and their four children are each deemed interested in Sarcadia LLC’s stake. Including his direct holding of 13.14%, Mr Christopher Borch has a total interest of about 43.3%, while Mr Kyle Borch has a total interest of about 33.0%. About 49.6% of issued shares are held by the public, well above SGX’s 10% minimum, so family control does not by itself constrain the stock’s liquidity.

The Group leases the office of its US subsidiary, Micro-Mechanics, Inc., from Sarcadia LLC, paying rental of USD 627,300 and electrical services of USD 210,000 in FY2026 (1QFY27: USD 156,825 and USD 52,500), disclosed as interested person transactions.

We do not view this as a material governance concern. The combined USD 0.8 million (about SGD 1.1 million) equals roughly 1.4% of FY2026 revenue and about 1.9% of shareholders’ equity of SGD 57.4 million, below the 3% of net tangible assets at which SGX rules require an immediate announcement and the 5% at which shareholder approval is needed. The Group’s policy requires such transactions to be at arm’s length and reviewed by the Audit and Risk Committee, which consists entirely of independent directors. That said, rental rose 11.7% YoY in FY2026 and no independent assessment of market rent is disclosed, so we would monitor further increases.

At an extraordinary general meeting on 30 October 2025, shareholders approved the Micro-Mechanics Performance Share Plan 2025 to reward high-performing employees with shares. The Group bought back 250,000 shares for about SGD 0.7 million in the 12 months to 14 September 2026, held as treasury shares to fund future awards; no awards had been granted as at that date.

The proposed FY2027 award of up to 100,000 shares to Mr Kyle Borch, worth about SGD 0.24 million at SGD 2.36 (closing price as of 11 November 2026), is tied to sales, gross margin, overhead margin and Five-Star Factory targets, the last being an internal programme that scores each factory on areas such as customer engagement, workplace efficiency and operational excellence. The award is small relative to his total interest of about 33.0%, which is the main source of his alignment with shareholders. Its value lies more in signalling the Board’s priorities: three of the four metrics are financial and match the five-year plan. The Five-Star metric is assessed internally and cannot be verified by investors, although every facility already scored at least 4.5 stars in 1QFY27, so it is unlikely to be the binding target.

Recent developments

  • 26 August 2026: FY2026 results and launch of a five-year mid-term growth strategy targeting revenue of at least SGD 150 million by FY2031, gross margin above 50% and overhead costs below 20% of revenue.
  • 26 August 2026: Announcement of segment renaming effective FY2027, with WFE Parts becoming Build-to-Print Precision Components.
  • 1QFY27: Installation of a new machine at the US plant to improve Build-to-Print machining quality and efficiency, following a year-long evaluation.
  • 26 October 2026: 1QFY27 results, with record quarterly revenue of SGD 24.2 million and record quarterly net profit of SGD 6.4 million, followed by a results briefing on 27 October 2026.

Industry overview

Global semiconductor sales at record highs, led by AI-driven memory and logic

The semiconductor industry entered FY2026 on a strong footing and accelerated through the year. According to WSTS, global semiconductor sales reached USD 796 billion in 2025, driven by continued investment in data centre infrastructure and AI-related computing platforms, with logic and memory the largest contributors to growth.

Figure 5: Annual worldwide semiconductor revenue, 1986 to August 2026

The pace has since stepped up sharply. SIA data show global sales rose 144.3% YoY to USD 159.7 billion in August 2026, up 8% from July, marking the 18th consecutive month of growth. Sales for the first eight months of 2026 reached USD 1,043 billion, already about 31% above the full-year 2025 total. Growth was broad-based, with sales up 180.9% YoY in the Americas, 143.0% in Asia Pacific and 131.3% in China, the Group’s largest market. WSTS expects 2026 global sales to grow 108.1% YoY to almost USD 1.7 trillion. Memory is forecast to grow 302% YoY on overwhelming demand, while logic is expected to grow 42% YoY.

Industry dollar growth does not translate one-for-one into Micro-Mechanics' revenue

Investors should not read the headline industry growth rate as a proxy for Micro-Mechanics' revenue. Much of the 2026 surge reflects sharply higher memory prices rather than proportionally higher unit volumes, whereas the Group's consumables are driven by the number of chips assembled and tested, factory utilisation and the installed base of back-end equipment. Its Build-to-Print parts are driven by front-end equipment capital expenditure and spec-in timing. Management itself cautions that Group revenue may not directly correlate with industry growth projections.

This explains why the Group's FY2026 revenue grew 15.8% and 1QFY27 revenue 45.0%, both well below the industry's dollar growth. We view this as a feature as much as a limitation: Micro-Mechanics is less exposed to a reversal in chip pricing than the industry headline suggests, and its demand is tied to production volumes rather than chip prices.

Advanced packaging, product refresh cycles and supply chain localisation

Two structural shifts are working in the Group’s favour, supported by a cyclical tailwind.

  • First, AI accelerators and high-bandwidth memory rely heavily on advanced packaging (structural), which raises the precision, cleanliness and trace-metal requirements placed on the tools that handle dies and packages. Combined with higher demand, we think that these are higher-value products that could translate into higher revenue growth.
  • Second, geopolitical pressure is pushing chipmakers to build localised supply chains, with suppliers expected to offer identical capabilities in multiple locations. For example, it is reported that within China, chipmakers seeking approval for new capacity must source at least half of their equipment domestically. In Malaysia, Penang secured RM20.2 billion of approved investments in 1H2026, led by semiconductors, and Intel’s Penang advanced packaging complex is due to start operations later in 2026. Micro-Mechanics is placed to meet this through its factories in China (Suzhou) and Malaysia (Penang), two of its three largest markets by sales, where FY2026 sales grew 26.6% and 15.1% respectively.
  • Third, management pointed to a computer refresh cycle (cyclical), a broader global refresh and a wave of new chips across the industry, which drive both larger volumes and higher-value products.

We believe these requirements raise the bar for suppliers, favouring those that can meet tighter precision and cleanliness standards consistently across several sites. With factories in five countries and a decentralised operating structure (further elaborated in Competitive Positioning), Micro-Mechanics is well-positioned to meet them.

Competitive Positioning

Process-critical consumables with utilisation-linked demand

Micro-Mechanics' consumable tools, such as die attach pick-up tools and wire bonding clamps, are small, inexpensive relative to the equipment they sit in, but critical to yield. A defective tool can damage dies or cause bonding failures, so customers place a high value on precision and consistency over unit price. Once a tool is specified into a customer's process, switching suppliers requires requalification, which creates customer stickiness.

As these tools wear out in use, demand is linked to customers' factory utilisation rather than one-off capital spending. This gives the Group a repeat revenue base that grows with the installed base of assembly and test equipment, although it still moves with the semiconductor cycle as utilisation rises and falls. Short lead times of two to four weeks allow it to respond quickly to customers' production needs.

Competing on precision, not volume

China is one of the most competitive markets, being large, with a well-developed supply chain geared towards high-volume production. However, Micro-Mechanics does not compete in high-volume commodity products. Instead, it focuses on high-end products that few others want to make, where customers need the quality, R&D support and precision the Group provides. Wire bonding is one example where management sees the Group at the leading edge.

Its operating model is built around new product introductions (NPI), quick turns, low quantities and responsiveness, with precision requirements of well below 5 microns (for reference, an A4 paper is 90 to 110 microns) according to management. We note that as chipmaking moves to more advanced nodes, scaling down to 2 to 3 nanometres, and to finer-pitch advanced packaging, the tools and components used in both front-end and back-end processes increasingly require tolerances well below 5 microns (0.005 mm). The Group works closely with customers' engineering teams to iterate on existing products and continues to win new customers.

The management also noted that capital is not the constraint on growth; the harder-to-replicate inputs are people, know-how, the right equipment and customer qualifications. We see this accumulated know-how, together with process qualification at customers, as the core of the Group's moat.

Localised footprint as a geopolitical buffer

The Group runs a decentralised structure, with five factories located close to its key customer bases. China, its largest market at 34.2% of FY2026 revenue, is supported by the Group's Suzhou facility, while Build-to-Print parts are made in California, close to the segment's main customers in the USA. Markets with a Group factory (China, the USA, Malaysia, Singapore and the Philippines) accounted for about 87% of FY2026 revenue, which limits its exposure to cross-border tariffs. The remaining 13%, mainly Taiwan (5.5%) and other markets (7.2%), is served from other countries and remains exposed. We view this localised model as an advantage when customers seek suppliers with identical capabilities across regions.

Figure 6: Micro-Mechanics' factories and distribution presence

Source: Micro-Mechanics 1QFY2027 results presentation.

Diversified customer base

The Group serves more than 600 customers across front-end and back-end segments, spanning equipment makers, Integrated Device Manufacturers (IDMs) and Outsourced Semiconductor Assembly and Tests (OSATs), with end-use applications from smartphones and consumer electronics to data centres, automotive and industrial. No customer contributed more than 10% of FY2026 or 1QFY27 revenue, and management noted that this broad coverage of the industry gives it visibility of the wider expansion in demand.

Process innovation and the Five-Star Factory initiative

The Group continues to invest in product and process capability, and we see potential links to earnings.

  • First, its R&D team is developing new elastomers for advanced packaging applications, which would extend its range into higher-value, more demanding tools and support the mix shift we expect from advanced packaging.
  • Second, its physics-based programming technology can improve material removal rates by 10% to 30% on long-cycle Build-to-Print parts. Faster machining means fewer machine hours per part, which lifts output from existing equipment and supports the segment’s margin recovery without proportionate capex.

The Five-Star Factory initiative, under which every facility scored at least 4.5 stars in the Group’s internal 8S programme in 1QFY27, is harder for investors to assess, as the scores are internal. We would instead track its effect through gross margin and overheads, the same metrics tied to the CEO’s FY2027 share award.

There are early signs the Group’s process and product efforts are contributing: 1QFY27 gross margin reached a 20-quarter high of 55.0%, which management attributed partly to stronger customer engagement, new product development and enhanced manufacturing processes, and overheads fell to 20.7% of revenue despite higher headcount and IT spending. However, as revenue rose 45.0% YoY, we cannot separate these gains from operating leverage, so we would look for margins to hold as growth normalises before crediting the initiatives fully.

Figure 7: Five-Star Factory initiative

Source: Annual Report FY2026. Data as of 30 June 2026.

Investment Thesis

Record 1QFY27 confirms the momentum is building

Micro-Mechanics exited FY2026 with clear momentum, and 1QFY27 accelerated it further. Revenue growth stepped up from +2.9% YoY in 1QFY26 to +29.2% in 4QFY26 and +45.0% in 1QFY27, while net profit growth reached +102.8% YoY. 1QFY27 revenue of SGD 24.2 million annualises to about SGD 97 million, 28% above FY2026 revenue.

The management said that the order book is increasing across all regions and across the supply chain, and that customers are able to order ahead, which helps planning. The Group also built inventory to SGD 5.3 million to fulfil confirmed backlog orders. Consumable Tools growth was largely driven by volume and new products from customers' NPI, with significant new projects coming up. We read the growth as a mix of volume and price, given the shift towards higher-value products.

Operating leverage is visible, though we hold a measured view beyond FY2027

Gross margin expanded in every quarter of FY2026 relative to the prior year, reaching 52.0% in 4QFY26, and stepped up again to a 20-quarter high of 55.0% in 1QFY27.

We note that both segments contributed to the improvement, while consumables remain the key source of profitability: Consumable Tools generated SGD 7.3 million of the Group's SGD 8.4 million 1QFY27 operating profit, with Build-to-Print contributing SGD 1.3 million and corporate costs of SGD 0.2 million. EBITDA rose 64.8% YoY against revenue growth of 45.0%, lifting EBITDA margin to 40.4% from 35.5% a year earlier.

This leverage comes from a largely fixed cost base. Overheads fell to 23.0% of revenue in FY2026 from 24.3% in FY2025, and to 20.7% in 1QFY27 on the company's measure, already close to management's target of below 20% by FY2031.

Looking ahead, we consider overheads manageable as headcount grows, through operational streamlining and more automation. However, rising depreciation from the capex programme is likely to absorb part of the gross margin gain, so we expect most of the operating leverage to come through in FY2027, with more modest gains thereafter from overheads (see “Our forecasts” section).

Five-year strategy: doubling revenue, funded internally

The Group's mid-term growth strategy, launched in August 2026, targets revenue of at least SGD 150 million by FY2031, equivalent to a 14.7% CAGR from FY2026. It rests on three priorities:

  • Strengthening customer support with expanded operations and localised capabilities, including expanding operations in China and Malaysia and expanding its physical presence in Taiwan.
  • Next generation processing, with investment in new equipment and processes for higher-precision, more process-critical applications.
  • Smart and secure manufacturing, through more data-driven decision making and ISO 27001-aligned cybersecurity capabilities.

To execute, the Group announced a capex budget of SGD 12.0 million in FY2027, more than triple the SGD 3.8 million invested in FY2026. Only SGD 0.9 million was spent in 1QFY27, which management attributed to the timing of initiatives, adding that spending remains on plan with no equipment constraints. The company is expanding capacity as customer demand ramps up. The investment is comfortably funded: FY2026 operating cash flow of SGD 18.9 million, backed by SGD 33.3 million of cash as at 30 September 2026, covers the FY2027 capex budget and dividends.

Figure 8: Micro-Mechanics' five-year roadmap

Source: Micro-Mechanics 1QFY2027 results presentation.

Build-to-Print: a turnaround under way

The segment was a drag on margins in FY2026, with an operating margin of about 4.3%. 1QFY27 marked a sharp turnaround: Build-to-Print sales almost doubled (+97.5% YoY) to SGD 5.9 million and segment operating profit reached SGD 1.3 million (a margin of about 22.2%), compared with a loss of SGD 0.4 million in 1QFY26. The growth was mostly driven by new bookings rather than catch-up, helped by the Group's focus on on-time delivery while lead times are stretched across the industry.

The new machine installed at the US plant is mainly about capacity to support a further customer-driven ramp and its extra automation lets the plant run more efficiently with fewer people. The Group is also implementing physics-based programming that can lift material removal rates by 10% to 30% on long-cycle parts.

Net cash balance sheet and consistent shareholder returns

With SGD 33.3 million in cash, no bank borrowings and FY2026 free cash flow (after lease payments) of about SGD 15.3 million, the Group can fund its growth plan, maintain dividends and buy back shares for its employee share plan. It has paid dividends every year since its 2003 listing, and, while dividends were cut in the last downturn, they were never suspended. Its dividend policy commits to a payout of at least 40% of earnings.

Catalysts

Boost from EQDP, GEMS and greater investor visibility

Micro-Mechanics is well-positioned to benefit from ongoing initiatives aimed at deepening Singapore's equity market. The company is a beneficiary of the Grant for Equity Market Singapore (GEMS) scheme, which supports homegrown firms in strengthening investor engagement and expanding their capital markets footprint. It could also see heightened investor attention from the Monetary Authority of Singapore's Equity Market Development Programme (EQDP), a SGD 6.5 billion initiative focused on boosting liquidity and institutional participation among small- and mid-cap counters. As a small-cap with thin trading liquidity, the stock stands to benefit from improved coverage and liquidity.

China, Taiwan and Malaysia: capacity and presence where the industry is growing

The Group’s five-year plan expands operations in China and Malaysia and builds a stronger physical presence in Taiwan, and we see two developments that could signal progress.

  • New capacity in China and Malaysia coming online: China, the Group’s largest market, grew 26.6% YoY to SGD 25.8 million in FY2026 and 23.1% YoY in 1QFY27, while Malaysia, a major hub for back-end assembly and test, grew 15.1% YoY to SGD 14.0 million and 41.6% YoY respectively. With only SGD 0.9 million of the SGD 12.0 million FY2027 capex budget spent in 1QFY27, a pick-up in spending and the commissioning of new capacity over 2Q to 4QFY27 would show the expansion is on track.
  • A Taiwan facility or new customer wins there: Taiwan contributed SGD 4.1 million (5.5% of revenue) in FY2026, growing only 4.5% YoY, before rising 46.2% YoY in 1QFY27. This is small for the market at the centre of advanced packaging, where TSMC’s CoWoS capacity alone is reported to reach 120,000 to 140,000 wafers a month in 2026. Announcing a Taiwan facility or new customer qualifications would point to a larger share of this demand.

Financial Analysis

Consistent cash generation through the cycle

Micro-Mechanics has generated positive operating cash flow in every quarter from FY2022 to FY2026, including through the FY2023 to FY2024 industry downturn. FY2026 net cash from operating activities was SGD 18.9 million (FY2025: SGD 18.3 million), despite a SGD 5.3 million combined build-up in inventories and receivables to support higher sales and backlog orders.

Figure 9: Quarterly operating cash flow, FY2022 to 1QFY27 (SGD million)

Net cash used in investing activities was SGD 1.9 million, mainly SGD 2.1 million of cash capex. Total PPE additions were higher at SGD 3.8 million, and other payables rose to SGD 2.5 million from SGD 0.6 million, which suggests part of the 4QFY26 capex (SGD 2.5 million in that quarter alone) was still unpaid at year-end and will flow through FY2027 cash flows. Net cash used in financing activities was SGD 10.6 million, comprising SGD 8.3 million of dividends, SGD 1.5 million of lease payments and SGD 0.6 million of share buybacks.

In 1QFY27, net cash from operating activities was SGD 4.6 million (1QFY26: SGD 4.5 million). Cash generated before working capital changes rose to SGD 9.7 million from SGD 5.9 million, but was partly absorbed by a SGD 3.1 million increase in receivables in line with record sales. After capex of SGD 0.9 million, lease payments of SGD 0.4 million and share buybacks of SGD 0.1 million, cash and bank balances rose to SGD 33.3 million.

Table 5: Summarised cash flow

(in SGD '000)

1QFY27

FY2026

FY2025

Net cash from operating activities

4,614

18,913

18,281

Purchase of property, plant and equipment

(877)

(2,140)

(1,446)

Payment of lease liabilities

(374)

(1,472)

(1,484)

Free cash flow (after leases)

3,363

15,301

15,351

Dividends paid

0

(8,342)

(8,342)

Cash and bank balances at period-end

33,278

30,138

23,284

Source: Micro-Mechanics FY2026 and 1QFY2027 financial statements, iFAST calculations.

Capex step-up will lift depreciation

The planned SGD 12.0 million of FY2027 investment is large relative to the Group's FY2026 depreciation charge of SGD 5.8 million and PPE of SGD 18.5 million. As new equipment comes online, depreciation will rise and could temporarily weigh on gross margin before new capacity is fully utilised.

Our forecasts

We expect revenue to reach SGD 122.8 million and net profit SGD 30.9 million by FY2029E (Table 6). Our FY2026 to FY2029E revenue CAGR of about 17.6% is above management’s 14.7% to FY2031, but the difference is front-loaded.

Our FY2027E growth of 27.2% largely reflects the momentum already seen in 1QFY27, whose revenue annualises to about SGD 97 million, slightly above our FY2027E forecast of SGD 96.1 million.

Beyond FY2027E, our growth of 14% and 12% for FY2028E and FY2029E is below management’s 14.7% path, and reaching its SGD 150 million target from our FY2029E base would require about 10.6% annual growth over FY2030 to FY2031.

Our key assumptions are Consumable Tools growth of 26%, 15% and 13%, Build-to-Print growth of 32%, 10% and 9%, gross margin of 53.5% in each year, overheads excluding net finance expense of 21.0%, 20.5% and 20.0% of revenue, and an effective tax rate of 24.5%, between the 22.9% recorded in 1QFY27 and the 26.2% of FY2026.

Table 6: Key forecasts

(in SGD million unless otherwise stated)

FY25A

FY26A

FY27E

FY28E

FY29E

Revenue

65.2

75.5

96.1

109.5

122.8

Consumable Tools

50.4

60.4

76.1

87.5

98.9

Build-to-Print

14.8

15.1

20.0

22.0

23.9

Revenue growth (%)

12.6%

15.8%

27.2%

14.0%

12.2%

Gross profit

32.2

38.9

51.4

58.6

65.7

Gross margin (%)

49.4%

51.6%

53.5%

53.5%

53.5%

Operating profit

16.6

21.8

31.2

36.1

41.1

Profit before tax

16.4

21.6

31.0

35.9

40.9

Net profit

12.4

15.9

23.4

27.1

30.9

Net margin (%)

19.0%

21.1%

24.4%

24.8%

25.2%

EPS (SGD cents)

8.92

11.44

16.88

19.55

22.28

DPS (SGD cents)

6.0

6.0

8.0

9.0

10.0

ROE (%)

25.2%

27.7%

33.0%

31.4%

29.7%

Source: Historical data is from Micro-Mechanics, while forecasted data are based on iFAST Estimates. Financial year end is on 30 June. Segment revenue may not sum to the total due to rounding.

For FY2027E, our revenue forecast of SGD 96.1 million implies an average of about SGD 23.9 million per quarter over 2Q to 4QFY27, slightly below the 1QFY27 level, as we allow for some normalisation in Build-to-Print bookings, which are lumpier than consumables demand. As the segment’s 1QFY27 recovery benefited partly from the low base of 1QFY26, we also do not extrapolate its 1QFY27 margin in full and see sustained profitability as upside to our forecasts. By FY2029E, our forecasts take revenue to SGD 122.8 million, which we view as achievable. We see further upside if Taiwan expansion and advanced packaging tooling ramp faster than expected.

With only SGD 0.9 million of the FY2027 capex budget spent in 1QFY27, most of the additional depreciation is still to come; our model has depreciation rising to about SGD 7.0 million in FY2027E and SGD 7.8 million in FY2028E. We assume capex of SGD 8.0 million in FY2028E and SGD 6.0 million in FY2029E as the expansion programme normalises, as management has not guided beyond FY2027. We therefore assume gross margin of 53.5% for FY2027E to FY2029E, below the 55.0% achieved in 1QFY27 but above the 51.6% of FY2026, which also allows for management’s investment in automation and operational excellence to support margins.

Our overhead assumptions of 21.0%, 20.5% and 20.0% of revenue (excluding net finance expense) compare with 20.5% on the same basis in 1QFY27 and 22.7% in FY2026. Including net finance expense of about SGD 0.2 million a year, they equal about 21.2%, 20.7% and 20.2% on the company’s measure. Each percentage point of overhead savings on our FY2029E revenue base would add roughly SGD 1.2 million to operating profit.

We forecast total DPS of 8.0 cents for FY2027E, 9.0 cents for FY2028E and 10.0 cents for FY2029E, up from 6.0 cents in each of FY2024 to FY2026. Despite management’s caution on the 2QFY27 interim dividend, this does not assume a more generous payout: implied payouts of about 45% to 47% sit between the 40% policy floor and the FY2026 payout of 52.4%, so the increase reflects higher earnings.

At the 40% floor, FY2027E DPS would still be about 6.8 cents. These imply an average dividend yield of about 3.8% over FY2027E to FY2029E based on the closing price of SGD 2.36 as of 11 November 2026, and projected free cash flow covers dividends about 1.4 times in FY2027E and 2.0 times in FY2028E. After these dividends and the capex programme, we expect cash and bank balances to rise to about SGD 60.6 million by FY2029E.

Valuation

We apply a fair price-to-earnings (P/E) multiple of 15.2x to our FY2029E EPS forecast of 22.3 cents, arriving at a target price of SGD 3.38, representing 43.2% upside from Micro-Mechanics’ closing price of SGD 2.36 as of 11 November 2026. In addition, we estimate an average annual dividend yield of about 3.8% over FY2027E to FY2029E, further supporting the total return potential for investors.

We use a cost of equity of 8.1%, a terminal growth rate of 2.0% and a terminal ROE of 20%. The cost of equity is based on CAPM, using a 2.4% risk-free rate (10-year SGS yield), a 4.2% equity risk premium, a 1.0% illiquidity premium and a beta of 1.1. This sits slightly below the 1.17 average of UMS, AEM and Frencken, as Micro-Mechanics’ consumables demand follows factory utilisation rather than equipment capex, but above the market, given its exposure to the semiconductor cycle.

The 2.0% growth rate reflects long-run nominal economic growth. Together with the 20% terminal ROE, this implies a long-run payout of about 90%, as a company growing at 2.0% with a 20% ROE needs to retain only about 10% of its earnings. This is well above our FY2027E to FY2029E payout forecasts of 45% to 47%, which reflect the current phase of heavy reinvestment rather than the steady state our multiple assumes.

15.2x sits about 1.1 standard deviations below Micro-Mechanics’ ten-year average forward P/E of 20.8x. It is above the current 14.0x FY2027E P/E, but about three-quarters of the 43.2% upside comes from earnings growth, with FY2029E EPS 32.0% above FY2027E.

We compare Micro-Mechanics with UMS Integration and AEM Holdings, the two other Singapore-listed semiconductor stocks under our coverage, alongside Frencken Group (not rated), for which we use Bloomberg consensus estimates.

These are not fundamental peers: all three are equipment- and capex-driven, supplying components, modules or test systems whose demand follows chipmakers’ and equipment makers’ investment cycles, whereas Micro-Mechanics sells consumables replaced in line with factory utilisation. The comparison therefore shows how the market values Singapore semiconductor stocks rather than direct competitors. As these companies have December year-ends while Micro-Mechanics has a June year-end, we compare each over its next three financial years (FY+1 to FY+3).

Our 15.2x fair P/E is below the 20.0x fair P/E we apply to UMS Integration and the 25.0x we apply to AEM Holdings, although the approaches differ. Our AEM and UMS multiples sit above their ten-year average forward P/Es of 13.5x and 15.2x, reflecting our view that AI-driven demand has structurally lifted their earnings profiles.

Micro-Mechanics starts from a higher base: its ten-year average of 20.8x already reflects the market’s long-standing recognition of its margins and returns. Our fair multiple for Micro-Mechanics is derived from our fair P/E framework rather than its trading history and sits below that average mainly because of our cautious terminal assumptions (2.0% growth and a fade in ROE to 20%), not because we see no improvement in its earnings profile.

Discount to UMS and AEM: Our multiple is derived from our fair P/E framework rather than set relative to these stocks. Micro-Mechanics’ structurally higher margins (FY2026 gross margin of 51.6% and net margin of 21.1%, rising to 55.0% and 26.4% in 1QFY27), a trailing 12-month ROE of 30.2% and lack of bank borrowings argue for a higher multiple. Its smaller size, thinner trading liquidity, execution risk on the capex ramp and less direct exposure to AI argue for a lower one. On balance, we view the resulting discount as reasonable.

Table 7: Comparison with Singapore semiconductor stocks

Company

Mkt cap (SGD bil)

Beta

Forward P/E (x)

Fair P/E (x)

Val. year

EPS growth (%)

iFAST rating / TP

FY+1

FY+2

FY+3

Micro-Mechanics

0.32

0.74

19.7

15.2

FY2029E

47.5

15.8

14.0

BUY / SGD 3.38

AEM Holdings

2.18

1.18

26.5

25.0

FY2028E

389.1

34.8

24.1

BUY / SGD 10.93

UMS Integration

1.69

1.13

23.0

20.0

FY2028E

72.2

29.1

22.0

HOLD / SGD 2.54

Frencken Group

0.87

1.21

18.7

n.a.

n.a.

10.9*

14.1*

18.1*

Not rated

Average (excl. Micro-Mechanics)

1.58

1.17

22.7

22.5

157.4

26.0

21.4

-

Source: Bloomberg Finance L.P., iFAST Estimates. Data as of 11 November 2026. Micro-Mechanics’ financial year ends on 30 June, so FY+1 to FY+3 refer to FY2027E to FY2029E; the other companies’ financial years end on 31 December, so FY+1 to FY+3 refer to FY2026E to FY2028E. EPS growth for Micro-Mechanics, UMS and AEM is based on iFAST Estimates; *Frencken (not rated) is based on Bloomberg consensus. Forward P/E is the Bloomberg BEst blended 12-month forward P/E. Beta is the 5-year weekly Bloomberg beta. Average for fair P/E is based on UMS and AEM only. Fair P/E is applied to the valuation-year EPS shown.


Micro-Mechanics trades at 19.7x consensus forward earnings, about 13% below the average of 22.7x. We view a discount as reasonable even though the Group has higher margins and no bank borrowings, given its much smaller market capitalisation, thinner trading liquidity and less direct exposure to AI-driven equipment spending than AEM and UMS.

Figure 10: Forward P/E ratio (X)

Figure 11: Micro-Mechanics' forward P/E ratio (X)

We anchor the target multiple on FY2029E earnings, by which point we expect the FY2027 capex programme to be fully contributing to output, with gross margin of 53.5% after absorbing the higher depreciation and overheads (excluding net finance expense) at 20.0% of revenue, giving a cleaner read on the Group's structural earnings power as it progresses towards its FY2031 targets.

We base the multiple on the durability of Micro-Mechanics’ earnings and its growth runway beyond our forecast horizon, rather than on the near-term growth already captured in our FY2029E EPS:

  • High-margin consumables with utilisation-linked demand: Consumable Tools contributed 80.0% of FY2026 revenue at a segment operating margin of about 36.6% (1QFY27: about 39.7%). Demand is tied to customers’ factory utilisation, installed base and new product introductions rather than one-off capital spending.
  • Growth runway beyond FY2029E: The structural drivers we identify, advanced packaging for AI and supply chain localisation (see Industry overview), extend beyond our forecast horizon. Against this backdrop, management’s FY2031 target of at least SGD 150 million would require about 10.6% annual growth beyond our FY2029E revenue, below the 12% to 14% we forecast for FY2028E and FY2029E, which we view as achievable.
  • Precision niche with know-how barriers: The Group focuses on high-end, low-volume, high-precision work, NPI and quick turns, where customer qualifications and process know-how are hard to replicate. That is reflected in consumables margins sustained above 35% through FY2026 and 1QFY27.

Taken together, we view 15.2x FY2029E EPS as a reasonable multiple that credits Micro-Mechanics' (SGX: 5DD) earnings durability and growth runway beyond FY2029E, while discounting for its small size, liquidity and execution risk on the capex ramp.

Table 8: Earnings table

Micro-Mechanics

FY26A

FY27E

FY28E

FY29E

P/E Ratio (X)

24.9

14.0

12.1

10.6

Earnings growth (%)

28.3%

47.5%

15.8%

14.0%

EPS (in SGD)

0.1144

0.1688

0.1955

0.2228

Upside Potential (%) (Fair P/E of 15.2X)

43.2%

Target Price

SGD 3.38

Current Price

SGD 2.36

Source: Historical data is from Micro-Mechanics, while forecasted data are based on iFAST Estimates. Financial year ends on 30 June. FY26A P/E is based on the closing price of SGD 2.85 as of 30 June 2026. FY27E-FY29E is based on closing price of SGD 2.36 on 11 November 2026.

Figure 12: Micro-Mechanics' share price and EPS

Investment risks

We set out the key risks below, along with factors that may mitigate them.

Semiconductor cyclicality

Demand depends on factory utilisation and industry capital spending, so a reversal in AI or memory demand could slow orders from a record base. Dividends fell from 12.0 cents (excluding specials) in FY2022 to 6.0 cents in FY2024 through the last downturn. However, this may be mitigated by the Group’s base of more than 600 customers, none above 10% of revenue, and by its consumables-led revenue mix, which tracks factory utilisation rather than one-off equipment purchases. Operating cash flow also stayed positive in every quarter of the FY2023 to FY2024 downturn, and the Group kept paying dividends through it.

Execution risk on the capex step-up

FY2027 capex of SGD 12.0 million is more than triple FY2026, with only SGD 0.9 million spent in 1QFY27. Delays in qualifying and filling new capacity could leave it underused, with depreciation weighing on margins before revenue benefits arrive. However, the capacity is being added in markets already growing strongly, with China and Malaysia up 23.1% and 41.6% YoY respectively in 1QFY27, which lowers the risk of it sitting idle. As most of the budget is still unspent, the Group also retains flexibility to slow spending if demand weakens. The cost of a delay is also contained: the incremental depreciation of about SGD 1.2 million we expect in FY2027E is roughly 1% of FY2027E revenue, and our 53.5% gross margin assumption already sits 1.5 percentage points below 1QFY27. Funding is not a constraint, with net cash of SGD 31.1 million at end-September 2026, almost three times the remaining SGD 11.1 million of the budget.

Sustainability of the Build-to-Print recovery

The segment’s operating margin rebounded to about 22.2% in 1QFY27 from about 4.3% in FY2026, helped by a low base. Front-end equipment orders are lumpier than consumables demand. However, the segment’s weight in Group earnings is limited. Build-to-Print made up 20.0% of FY2026 revenue but only about 3% of segment operating profit, and about 15% in 1QFY27, so a reversal would have a modest effect on Group earnings. Our forecasts also do not assume the 1QFY27 margin is sustained.

China competition and geopolitical exposure

China accounted for 34.2% of FY2026 revenue and is highly competitive. Trade restrictions, export controls or local competition could weigh on the Group’s largest market. However, this may be mitigated by the Group’s geographic spread, with the US (21.2%), Malaysia (18.5%), Singapore (7.9%) and other markets accounting for the remaining 65.8% of FY2026 revenue. Its Suzhou factory also produces locally for customers in China, which limits exposure to cross-border tariffs.

Talent and capability constraints

Precision tooling depends on skilled technicians, process know-how and customer qualifications, which take longer to build than physical capacity, so a shortage of qualified staff could slow the ramp of new capacity. However, this may be mitigated by the expansion being concentrated at existing sites in China and Malaysia, where the Group already has trained teams and qualified processes, rather than at new locations. The Performance Share Plan adopted in October 2025 also gives the Group an equity-based retention tool, although no awards have been granted under it yet.

Input costs and the Middle East conflict

The management is closely monitoring the Middle East conflict and its effects on supply chains, material costs and customer demand, and the Group continued to build inventory into 1QFY27 in response to higher material costs and longer lead times. These pressures could weigh on gross margin if they cannot be passed on. However, the Group has so far protected its margins, with gross margin rising to 51.6% in FY2026 from 49.4% in FY2025 and to 55.0% in 1QFY27, which suggests pricing has kept pace with costs. As its tools are process-critical and directly affect customers’ yields, we think customers are less likely to switch suppliers on price alone, which should help the Group pass on cost increases.

Foreign exchange

Revenue and costs span several currencies, while the Group reports in Singapore dollars. FX swung from a SGD 1.3 million translation gain in FY2026 to a SGD 0.4 million loss in 1QFY27. However, the impact on reported earnings appears limited, as these translation differences are recognised in other comprehensive income rather than net profit. Manufacturing in its main markets also matches revenue and costs in the same currencies, providing a partial natural hedge.

Thin trading liquidity

Trading in the stock is thin, which can widen bid-ask spreads and make it harder for investors to build or exit positions without moving the price. However, public float is 49.6%, well above SGX’s 10% minimum, so liquidity is constrained more by the stock’s small market capitalisation of about SGD 320 million than by its shareholding structure. Initiatives such as GEMS and the Equity Market Development Programme (EQDP) may help improve research coverage and liquidity over time.

Lower-than-expected dividends

The management did not commit to the 2QFY27 interim dividend, citing expansion plans and a cash buffer, and payouts below our forecasts would reduce returns. However, as set out under Our forecasts, we do not assume a higher payout, and even the 40% policy floor would lift FY2027E DPS above the 6.0 cents paid in each of FY2024 to FY2026.

Note

iFAST Research rating system

iFAST Research employs a five-tier rating system: Buy (material upside potential, favourable risk-return); Accumulate (moderate upside, selectively add on weakness); Hold (limited upside, maintain existing positions); Trim (upside insufficient to justify a full position, reduce exposure on strength); and Sell (material downside risk, exit position).

Disclaimer

For specific disclosure, at the time of publication of this report, IFPL (via its connected and associated entities) and the analyst who produced this report hold a NIL position in the abovementioned securities.

This research report is produced under the Grant for Equity Market Singapore (“GEMS”) Scheme. iFAST Financial Pte Ltd receives financial compensation for the preparation and publication of this report. For more information regarding the GEMS scheme and its objectives, please refer to this infographic. iFAST Financial Pte Ltd maintains editorial independence regarding the analysis and conclusions presented herein.

All materials and contents found in this report are strictly for general circulation and informational purposes only and should not be considered as an offer, or solicitation, to deal in any of the funds or products found/identified in this report. While iFAST Financial Pte Ltd ("IFPL") has tried to provide accurate and timely information, there may be inadvertent delays, omissions, technical or factual inaccuracies and typographical errors. Any opinion or estimate contained in this report is made on a general basis and neither IFPL nor any of its servants or agents have given any consideration to nor have they or any of them made any investigation of the investment objective, financial situation or particular need of any user or reader, any specific person or group of persons. You should consider carefully if the products you are going to purchase are suitable for your investment objective, investment experience, risk tolerance and other personal circumstances. If you are uncertain about the suitability of the investment product, please seek advice from a financial adviser, before making a decision to purchase the investment product. Past performance is not indicative of future performance. The value of the investment products and the income from them may fall as well as rise. Opinions expressed herein are subject to change without notice. In respect of any matters arising from, or in connection with the said research analyses or research reports, recipients of the report are to contact IFPL at 10 Collyer Quay, #26-01 Ocean Financial Centre Building, Singapore 049315, or by telephone at +65 6557 2853. Where the report contains research analyses or research reports from a foreign research house and if the recipient of such research analyses or research reports is not an accredited investor, expert investor, institutional investor or an ex-accredited investor, IFPL accepts legal responsibility for the contents of such analyses or reports to such persons only to the extent as required by law. Please note that only certain security(ies) herein are available to all investors, while the rest are only available for certain persons to invest in, such as Accredited Investors (as defined in the Securities and Futures Act) or one who invests at least S$200,000 (or its equivalent currency) per transaction. To qualify as an Accredited Investor, one needs to submit a declaration form and certain relevant supporting documents, according to iFAST’s prevailing policies and procedures.

Please read our full disclaimers on the website at (https://fsm.global/sg/policies/288123/terms-&-conditions)

iFAST Financial Pte Ltd (IFPL) (registered address: 10 Collyer Quay #26-01 Ocean Financial Centre Singapore 049315, Telephone: 6557 2000) holds the Financial Advisers Licence issued by the Monetary Authority of Singapore ('MAS') to conduct regulated activities of advising on securities, marketing of collective investment schemes and arranging of any contract of insurance in respect of life policies, other than a contract of reinsurance and the Capital Markets Services Licence issued by the MAS to conduct regulated activities of dealing in securities and providing custodial services for securities. While IFPL has made every effort to ensure the independence of the report's contents, IFPL's nature of business is such that IFPL and its connected and associated entities together with their respective directors, officers and staff may be involved in providing dealing or investment-related services in the abovementioned securities, and have taken or may take positions in the securities mentioned in this report, and may also act as the principal for any buy or sell trades.

All materials and contents found in this site are strictly for general circulation and informational purposes only and should not be considered as an offer, or solicitation, to deal in any of the funds or products found/identified in this site. While iFAST Financial Pte Ltd ("IFPL") has tried to provide accurate and timely information, there may be inadvertent delays, omissions, technical or factual inaccuracies and typographical errors. Any opinion or estimate contained in this report is made on a general basis and neither IFPL nor any of its servants or agents have given any consideration to nor have they or any of them made any investigation of the investment objective, financial situation or particular need of any user or reader, any specific person or group of persons. You should consider carefully if the products you are going to purchase are suitable for your investment objective, investment experience, risk tolerance and other personal circumstances. If you are uncertain about the suitability of the investment product, please seek advice from a financial adviser, before making a decision to purchase the investment product. Past performance is not indicative of future performance. The value of the investment products and the income from them may fall as well as rise. Opinions expressed herein are subject to change without notice. In respect of any matters arising from, or in connection with the said research analyses or research reports, recipients of the report are to contact IFPL at 10 Collyer Quay, #26-01 Ocean Financial Centre Building, Singapore 049315, or by telephone at +65 6557 2853. Where the report contains research analyses or research reports from a foreign research house and if the recipient of such research analyses or research reports is not an accredited investor, expert investor, institutional investor or an ex-accredited investor, IFPL accepts legal responsibility for the contents of such analyses or reports to such persons only to the extent as required by law. Please note that only certain security(ies) herein are available to all investors, while the rest are only available for certain persons to invest in, such as Accredited Investors (as defined in the Securities and Futures Act) or one who invests at least S$200,000 (or its equivalent currency) per transaction. To qualify as an Accredited Investor, one needs to submit a declaration form and certain relevant supporting documents, according to iFAST’s prevailing policies and procedures.

Please read our full disclaimers on the website at ( https://fsm.global/sg/policies/328125/investment-account-terms-&-conditions).

iFAST Financial Pte Ltd (IFPL) (registered address: 10 Collyer Quay #26-01 Ocean Financial Centre Singapore 049315, Telephone: 6557 2000) holds the Financial Advisers Licence issued by the Monetary Authority of Singapore ('MAS') to conduct regulated activities of advising on securities, marketing of collective investment schemes and arranging of any contract of insurance in respect of life policies, other than a contract of reinsurance and the Capital Markets Services Licence issued by the MAS to conduct regulated activities of dealing in securities and providing custodial services for securities. While IFPL has made every effort to ensure the independence of the report's contents, IFPL's nature of business is such that IFPL and its connected and associated entities together with their respective directors, officers and staff may be involved in providing dealing or investment-related services in the abovementioned securities, and have taken or may take positions in the securities mentioned in this report, and may also act as the principal for any buy or sell trades.

In this article

SGX: 5DDDelayed

Micro-Mechanics
SGD 2.360 2.61%

Stay updated with us on Telegram

Like us on Facebook

Follow us on Instagram

Watch our videos on YouTube