
- 3Q26 revenue rose 61% YoY to SGD 95.4m, the highest quarterly level in three financial years, and net attributable profit rose 102% YoY to SGD 21.1m (+8.7% QoQ). Excluding other credits and charges, pre-tax profit grew about 64% YoY.
- The new major customer drove the quarter. Component sales rose 87% YoY to SGD 55.8m, and Malaysia and South Korea, the two markets tied to that customer, made up 33.5% of revenue, up from 20.2% in 3Q25.
- Growth came at a lower margin. Gross material margin fell to 51.8% from 58.2% a year ago as the mix shifted towards components, which rose to 67% of semiconductor revenue from 59% in 3Q25.
- The Malaysian placement closed on 12 October 2026, raising net proceeds of RM 442.6m, and RM 37.0m of the proceeds (8.4%) has already been used, mostly for Vietnam and Singapore.
- We maintain our fair P/E of 20x. Applied to FY2028E EPS of 12.72 cents, it gives an unchanged target price of SGD 2.54, implying 45.1% upside from SGD 1.75 (closing price as of 10 November 2026). We maintain our BUY rating.
In our sector report on 6 November 2026, we upgraded UMS Integration (SGX: 558) to BUY following the share price sell-off, supported by strong results from Lam Research and improving outlook from both Lam and Applied Materials, which is scheduled to report its earnings on 12 November (after market close). UMS’s own 3Q26 results now show that demand coming through in its numbers.
9M26 revenue of SGD 251.9m has already exceeded the SGD 251.1m UMS recorded in the whole of FY2025. Moreover, 9M26 net attributable profit of SGD 54.5m made up 75% of our previous FY2026E estimate.
The 3Q26 results change two inputs in our model.
- First, the revenue mix. Components for the new major customer are growing faster than we assumed, while integrated systems, tied to Applied Materials, slipped on a parts shortage. This lifts our revenue forecasts but pulls gross material margin below the 54.5% we had assumed.
- Second, the placement is now complete. All 52.9m shares were placed on 12 October 2026, and UMS has started to draw on the proceeds. We update our share count and interest income for the actual completion date and the pace of spending.
UMS 3Q26 results: a record quarter, led by the new customer
UMS reported its highest quarterly revenue in three financial years. Revenue rose 61% YoY to SGD 95.4m, and net attributable profit rose 102% YoY to SGD 21.1m, up 8.7% QoQ from SGD 19.4m in 2Q26.
Table 1: UMS 3Q26 results summary
|
SGD m |
3Q25 |
3Q26 |
YoY |
9M25 |
9M26 |
YoY |
|
Revenue |
59.3 |
95.4 |
+61% |
184.3 |
251.9 |
+37% |
|
Semiconductor |
50.5 |
83.1 |
+65% |
157.9 |
217.5 |
+38% |
|
of which integrated systems |
20.7 |
27.3 |
+32% |
68.6 |
83.2 |
+21% |
|
of which components |
29.8 |
55.8 |
+87% |
89.3 |
134.4 |
+50% |
|
Aerospace |
6.3 |
9.7 |
+55% |
17.8 |
25.6 |
+43% |
|
Gross material margin |
58.2% |
51.8% |
-6.4 ppt |
56.1% |
52.8% |
-3.2 ppt |
|
Profit before tax |
13.2 |
24.0 |
+81% |
36.7 |
62.1 |
+69% |
|
Net attributable profit |
10.5 |
21.1 |
+102% |
30.5 |
54.5 |
+78% |
|
EPS (SGD cents) |
1.18 |
2.37 |
+102% |
3.44 |
6.13 |
+78% |
|
Source: UMS 3QFY2026 results announcement and press release (10 November 2026). Gross material margin is our calculation from the income statement; UMS reports it rounded at 52% for 3Q26 and 53% for 9M26. EPS is on the post-bonus share count. |
||||||
Components did most of the work. Component sales rose 87% YoY to SGD 55.8m and now make up 67% of semiconductor revenue, compared with 59% in 3Q25. Integrated system sales rose 32% YoY to SGD 27.3m but fell from SGD 33.5m in 2Q26. The QoQ decline was due to a shortage of OEM parts, which the management expects to ease in the coming months. Meanwhile, Aerospace revenue rose 55% YoY to SGD 9.7m.
The geographic split further highlights the growing contribution from UMS’s new major customer. In 3Q26, Malaysia revenue rose 209% YoY to SGD 24.3m as the Penang ramp for the new major customer accelerated, and South Korea revenue rose 86% YoY to SGD 7.7m. Together, the two markets contributed SGD 31.9m, or 33.5% of 3Q26 revenue, up from 20.2% a year ago. Singapore revenue also grew, rising 27% YoY to SGD 44.9m, but its share of revenue fell to 47.1% from 59.9% as growth shifted to the new customer’s markets.
The nine-month figures show the same shift (Figure 1). In 9M26, Malaysia revenue almost doubled YoY to SGD 50.3m, and South Korea rose 170% YoY to SGD 17.6m. The two markets together grew 114% YoY to SGD 67.8m, lifting their share of revenue to 26.9% from 17.2% in 9M25. Singapore remained the largest revenue contributor and grew its revenue 20% YoY to SGD 137.6m, but its share fell to 54.6% from 62.0%. Taiwan rose 31% YoY to SGD 16.7m, while the US grew 4% YoY to SGD 21.3m.
Figure 1: UMS revenue by geography, 9M25 vs 9M26

While reported earnings growth was strong, part of the increase reflected non-operating gains. Other credits and charges swung from a SGD 0.6m net charge in 3Q25 to a SGD 1.4m net credit in 3Q26, including a SGD 1.6m FX gain. Excluding this line, pre-tax profit grew about 64% YoY in 3Q26 and about 48% YoY in 9M26, against reported growth of 81% and 69%, indicating that the earnings improvement was primarily driven by stronger underlying operations.
Lower gross margins are the price of the ramp
Revenue grew strongly, but gross material margin fell to 51.8% in 3Q26, from 54.2% in 2Q26 and 58.2% in 3Q25. UMS attributes this mainly to the product mix. Components rose to 67% of semiconductor revenue in 3Q26, from about 56% in 2Q26, as sales to the new major customer grew while integrated system sales were held back by the parts shortage. UMS does not disclose product-level profitability, so the precise impact of the changing mix is difficult to quantify.
Costs also rose, although the YoY increase in staff costs overstates the trend. Employee benefits rose 51% YoY to SGD 11.9m, as 3Q25 was flattered by a write-back of excess bonus provisions. Depreciation rose 20% YoY to SGD 7.5m on more production equipment, and other expenses rose 11% YoY on higher freight charges, upkeep of property and equipment, and utility costs.
Nevertheless, stronger revenue helped offset the pressure on gross material margins through improved operating leverage. Excluding other credits and charges, EBIT margin edged up to 23.7% in 3Q26 from 23.1% in 3Q25. The 6.4 ppt fall in gross material margin was more than offset by operating costs falling to 28.1% of revenue from 35.1%, as revenue grew faster than costs.
We now assume margins stay lower until FY2028E. We cut our gross material margin assumption to 52.5% for 4Q26E and 53.0% for FY2027E, from 54.5%. The revised forecasts are broadly consistent with the 52.8% margin recorded by UMS in 9M26.
For FY2028E, we assume a partial recovery to 53.8%, still below 2Q26’s 54.2%, as the Penang projects funded by 75% of the placement proceeds, including automation, start to improve efficiency. Only 1.5% of that tranche has been used so far, so the timing of this benefit is a key risk to our forecast.
Higher revenue broadly offsets the margin cut. We raise component revenue to reflect the 3Q26 run-rate, but assume only 2% QoQ growth in 4Q26E, as new capacity from the placement will only start contributing from FY2027E. We lower integrated system revenue for the parts shortage, assuming a 10% QoQ recovery in 4Q26E and some catch-up in FY2027E.
Table 2: Key forecast changes
|
|
FY2026E |
FY2027E |
FY2028E |
|
Revenue, previous (SGD m) |
330.3 |
395.9 |
459.3 |
|
Revenue, new (SGD m) |
351.1 |
418.4 |
477.5 |
|
Components, new (previous) |
191.2 (166.6) |
233.3 (209.9) |
275.3 (256.0) |
|
Integrated Systems, new (previous) |
113.2 (118.5) |
133.6 (136.3) |
147.0 (149.9) |
|
Gross material margin, new (previous) |
52.7% (54.0%) |
53.0% (54.5%) |
53.8% (54.5%) |
|
Net attributable profit, new (previous) (SGD m) |
76.3 (72.6) |
98.0 (98.0) |
119.6 (119.5) |
|
Source: iFAST estimates. Forecasts include revenue from placement-funded capacity of about SGD 10m in FY2027E and SGD 26m in FY2028E, unchanged from our previous update. |
|||
The net effect is concentrated in FY2026E, where the stronger 3Q26 run-rate lifts our net profit forecast by 5%. In FY2027E and FY2028E, higher revenue broadly offsets the lower margin, leaving EPS close to our previous forecasts. Each 1 ppt of gross material margin is worth about 0.44 cents of FY2028E EPS, or about SGD 0.09 on our target price.
Supply, not demand, now sets the pace. Lam Research’s December-quarter guidance was held back by component suppliers that could not keep up, and UMS’s own integrated system sales were held back by a shortage of OEM parts. Neither company has said UMS is part of Lam’s bottleneck. In the near term, the pace at which UMS adds component capacity and the supply of parts for integrated systems matter more for its earnings than the equipment cycle. Applied Materials is scheduled to report its fiscal 4Q26 results on 12 November (after market close), and its outlook should give a clearer read on demand for UMS’s integrated systems.
UMS placement completed, with spending already under way
The placement closed in full. UMS completed the placement of 52,941,100 new shares on Bursa Malaysia on 12 October 2026, three days later than first planned, raising gross proceeds of about SGD 141m (RM 450m). The management said it was oversubscribed, with participation from global and regional institutional investors. Our forecasts already assumed the maximum size, so the only change to our share count is the completion date.
Table 3: Use of placement proceeds as of 10 November 2026
|
RM m |
Allocation |
Utilised |
Balance |
|
Projects in Penang, Malaysia |
332.0 |
5.0 |
327.0 |
|
Projects in Vietnam and Singapore |
110.7 |
32.0 |
78.6 |
|
Total |
442.6 |
37.0 |
405.6 |
|
Source: UMS 3QFY2026 results announcement, Note 14. Net proceeds of RM 442.6m are equivalent to about SGD 138.6m. |
|||
UMS has started drawing on the proceeds, using 29% of the Vietnam and Singapore tranche so far, against under 2% of the Penang tranche. UMS has not disclosed how the former splits between the two countries, and its Penang expansion has so far been funded from internal cash, with SGD 16.3m of capex in 9M26. In Vietnam, a wholly owned UMS Vietnam Integration Company Limited now appears in UMS’s list of subsidiaries, and the management says it is setting up a joint venture company to add capacity. We keep our assumption of about SGD 26m of revenue from new capacity in Penang and Vietnam in FY2028E, as UMS has not disclosed a start date for the Vietnam facility. An earlier start would be upside to our forecasts.
Stronger cash flow and a higher dividend
UMS’s cash generation improved sharply, with operating cash flow rising to SGD 21.2m in 3Q26 from SGD 1.7m in 3Q25. Free cash flow also recovered to SGD 14.9m, against negative SGD 10.8m in 3Q25. Over 9M26, free cash flow of SGD 36.8m covered the SGD 26.6m of dividends paid.
The balance sheet strengthened despite a build-up in working capital. Trade receivables and other current assets rose SGD 30.7m since December on higher sales and advance payments to suppliers, while inventory held at SGD 151.2m. Net cash rose to SGD 44.0m at end-September from SGD 38.6m at end-June, and adding the net placement proceeds gives pro forma net cash of about SGD 183m before any use of the proceeds.
UMS declared a third interim dividend of 1.0 cent (books close on 2 December, payable on 18 December), taking 9M26 dividends to 3.0 cents. As the placement shares were issued before the entitlement date, they will also receive this dividend, raising the total payout by about SGD 0.5m.
We raise our FY2026E dividend. Higher earnings give UMS room to keep its final dividend at 2.0 cents, the same as for FY2025, which lifts our FY2026E DPS to 5.0 cents from 4.0 cents, a 59% payout ratio. This implies a yield of 2.9% at SGD 1.75 (closing price as of 10 Nov 2026). We keep FY2027E and FY2028E DPS at 5.3 and 6.6 cents, implying yields of 3.0% and 3.8% respectively.
Figure 2: UMS dividends per share and payout ratio

UMS valuation and target price
We raise FY2026E EPS by 5% and leave FY2027E and FY2028E broadly unchanged. The 3Q26 run-rate lifts near-term earnings, while higher revenue offsets our lower margin assumptions in later years. Our forecasts imply EPS growth of 23% in FY2027E and 22% in FY2028E.
Table 4: EPS forecast changes (SGD cents)
|
|
FY2026E |
FY2027E |
FY2028E |
|
Previous (October 2026) |
8.07 |
10.42 |
12.71 |
|
New |
8.49 |
10.42 |
12.72 |
|
Change |
+5% |
- |
- |
|
Source: iFAST estimates. All EPS on a post-bonus basis. FY2026E weights the 52.9m placement shares from 12 October 2026; FY2027E and FY2028E include them in full. |
|||
We maintain our fair P/E of 20x. This is justified by the company's expanding customer base, stronger earnings outlook and improved financial flexibility following its share placement. However, we see limited scope for multiple expansion at this stage, given the mix shift that has lowered gross material margin and the execution risks around new capacity. We therefore see no case to move the multiple in either direction.
UMS trades at 22.2x consensus forward earnings, below AEM at 25.9x and above Frencken at 17.6x (Figure 3). Our 20x is about 0.65 standard deviations above UMS's 10Y average of 15.1x (Figure 4). We keep it below AEM's 25x: AEM's configurables and collaterals give it a recurring revenue base, while UMS's earnings remain more tied to equipment orders and to its own capacity build.
Related article: AEM Holdings: Riding the AI/HPC test wave
Figure 3: UMS forward P/E vs AEM and Frencken

Figure 4: UMS forward P/E

Figure 5: UMS EPS YoY growth vs AEM and Frencken for FY2026E to FY2028E

Applying 20x to FY2028E EPS of 12.72 cents gives an unchanged target price of SGD 2.54, implying 45.1% upside from SGD 1.75 (closing price as of 10 Nov 2026). At this price, UMS trades at 13.8x our FY2028E EPS, well below our fair P/E. We maintain our BUY rating.
Table 5: Valuation table
|
|
2025 |
2026E |
2027E |
2028E |
|
EPS (SGD) |
0.047 |
0.085 |
0.104 |
0.127 |
|
EPS growth |
2.6% |
81.2% |
22.7% |
22.1% |
|
P/E ratio (x) |
24.3 |
20.6 |
16.8 |
13.8 |
|
Dividend yield |
3.5% |
2.9% |
3.0% |
3.8% |
|
Target price (20x FY2028E) |
|
|
|
SGD 2.54 |
|
Upside potential (excluding dividend) |
|
|
|
45.1% |
|
Source: Bloomberg Finance L.P., iFAST estimates. All per-share figures post-bonus adjusted. 2025 P/E and yield based on the bonus-adjusted 31 December 2025 price of SGD 1.14; 2026E to 2028E based on SGD 1.75, the closing price on 10 November 2026. Consensus forward P/E as of 10 November 2026. |
||||
Figure 6: UMS share price and EPS chart

Conclusion: maintain BUY on UMS Integration
The 3Q26 results show the new major customer scaling faster than we expected, with UMS generating enough cash to pay its dividends while the placement funds its next round of capacity. The cost is a lower gross material margin, which broadly offsets our revenue upgrade beyond FY2026E, so we keep our target price at SGD 2.54.
The current share price also presents an attractive entry point. At SGD 1.75, UMS trades at 13.8x our FY2028E EPS, against our fair P/E of 20x. We maintain BUY rating on UMS Integration (SGX: 558) with a target price of SGD 2.54 and see Applied Materials' results on 12 November and progress on the Vietnam facility as the next checkpoints.
Key risks to our view.
The main risk to our BUY rating is that earnings fall well short of our forecasts. At 20x, our target price would only fall to the current share price if FY2028E EPS dropped to about 8.75 cents, 31% below our forecast. Risks that could narrow that buffer include:
- Margins: our FY2028E forecast assumes gross material margin recovers to 53.8%. If it stays near the 9M26 level of about 53%, FY2028E EPS would be about 12.4 cents and our target price about SGD 2.48. Each 1 ppt of margin is worth about 0.44 cents of FY2028E EPS.
- Supply constraints: a longer shortage of OEM parts would delay the integrated system recovery we assume, and slower progress in Penang or Vietnam would cap component growth.
- The equipment cycle: a pause in spending by either key customer, renewed AI funding concerns or data centre moratoriums in the US could defer equipment orders. Aerospace, at about 10% of 9M26 revenue, would cushion only part of such a decline.
Upside risks include an earlier start for the Vietnam facility, a faster catch-up in integrated system sales once the parts shortage eases, and a stronger margin recovery than the 53.8% we assume for FY2028E.
Note
iFAST Research rating system: iFAST Research employs a five-tier rating system: Buy (material upside potential, favourable risk-return); Accumulate (moderate upside, selectively add on weakness); Hold (limited upside, maintain existing positions); Trim (upside insufficient to justify a full position, reduce exposure on strength); and Sell (material downside risk, exit position).
Declaration: For specific disclosure, at the time of publication of this report, IFPL (via its connected and associated entities) and the analyst who produced this report hold a NIL position in the abovementioned securities.
This research report was prepared with the assistance of artificial intelligence (AI) tools. iFAST Financial Pte Ltd does not rely exclusively on AI for content generation; the content of this report, including all investment theses, ratings, price targets and conclusions, has been independently reviewed and verified by the research analyst(s) to ensure accuracy and professional integrity.

